PE - HD (100)

PE - HD (100)


Product full identity:
Polyethylene - High Density

PE100 is cerified grade of HDPE that is proven to be highly resistant to stress cracking under increased pressure ratings.

Properties


  • High resistance to stress cracking
  • High impact strength
  • Wide temperature range (+80 to -50°C)
  • Good chemical resistance
  • Lightweight and weldable
  • Very low moisture absorption <0.1%.

Applications


  • Chemical tanks
  • High pressure applications
  • Boat building

Forms


  • Sheet
  • Pressure pipe
  • Weld rod
Download Product Information Click here for Product Availability

Technical Properties:

All information is for guide purposes only. The data has been taken from standard test results provided by our manufacturers.

Property Unit Test Method Value
Specific gravity g/cm³ DIN EN ISO 1183 0.96
Maximum service temp. Upper temp limit - short term °C 80
Lower temp limit °C -50
Property Unit Test Method Value
Tensile strength MPa DIN EN ISO 527 23
Elongation at yield % DIN EN ISO 527 9
Unnotched Impact strength kJ/m² DIN EN ISO 179 no break
Notch impact strength kJ/m² DIN EN ISO 179 21
Ball indentation / Rockwell hardness MPa DIN EN ISO 2039-1 40
Tensile modulus of elasticity MPa DIN EN ISO 527 1100
Shore-D DIN EN ISO 868 64
Shore-D DIN EN ISO 868 64
Property Unit Test Method Value
Surface resistivity Ω DIN IEC 60093 ≥1013
Dielectric strength kV/mm DIN IEC 60243-1 47
Property Unit Test Method Value
Coefficient of linear thermal expansion 23°C - 100°C m/(m.K) ISO 11359-2 1.8 x 10-4
Thermal conductivity at 23°C W/mK DIN EN 12667 0.38
Property Unit Test Method Value
Food compliance - FDA FDA yes (natural only)
Food compliance - EU EU yes
Food compliance - FDA FDA yes (natural only)
Food compliance - EU EU yes
Property Unit Test Method Value
Fire performance DIN 4102 B2
Fire performance DIN 4102 B2
Property Unit Test Method Value
Download Technical Information